Scroll Top
Water-based, acrylic copolymer resin-based and matt looking decorative interior wall paint.
Ruby plastic interior Active paint
PRODUCT DESCRIPTION

Water-based, acrylic copolymer resin-based and matt looking decorative interior wall paint.

PROPERTIES

It has high covering capacity and ensures good adherence to recommended surfaces. It is easy to apply as it spreads well. It enables the application surfaces to breathe. It is odourless and environment-friendly.

DRYING TIME

Touch Dry: 30-40 minutes. Waiting between coats: 3-4 hours. Through-dry time: 24 hours. (23 °C and 50% Humidity)

APPLICATION

It can be easily applied to any kind of plaster, exposed and gas concrete, concrete panel, plaster board, walls and ceilings with old paints, mdf, osb surfaces after recommended basis forming and primer procedures.
The application areas should be dry, clean and free from dust. The old and blistered painted surfaces should be cleaned by scraping. Rough or loose surfaces should be filled with Acrylic Interior Putty when necessary in order to smoothen the surface. After smoothening process, it is recommended to use Acrylic Transparent Primer or Acrylic 1/7 Concentrated Primer of one coat on absorbent surfaces such as the calcareous ones or ones on which satin plaster and putty are applied so as to reduce top coat paint consumption and enhance adhesion of paint on surface. The surfaces on which synthetic paint is applied should be sandpapered and it should be free of dust. It is recommended to use Acrylic Cover Primer of one coat as transformation primer while shifting from synthetic painted surface to water-based surface and in case of colour changes. It is applied on surfaces as two coats on which Plastic Matt primer has been applied by roll or brush after diluting by 20% at maximum with water. Waiting time between coats is 3-4 hours (may vary according to ambient temperature). Application temperature should be between 5°C and 35°C.

CONSUPMTION

Depending on absorbing capacity and type of the surface, an area of 12-14 m²/lt is painted on single layer. Field sample work should be carried out for precise consumption.

STORAGE

It should be kept in its closed package, in a dry and cool place that is not directly exposed to sunlight and between 5°-35° C and should be protected from frost.

SAFETY PHRASES

R 22: It is harmful to health if swallowed. Safety warnings: S 2: Keep out of reach of children.

S 3/7: Keep the pot in a cool place having its cap closed.

S 24/25: Avoid contact with eyes and skin. 5 29: Do not discharge to sewerage system.

S 46: If swollen, seek medical advice immediately, and show the pot or the label.

OUR Products