It can be applied easily on concrete, plaster, rough rendering, exposed concrete, gas concrete, briquette, bush-hammered mosaic, precast concrete panel and previosu- ly-painted surfaces after the recommended background formation and priming process. All surfaces should be dry, clean and free from dust. Old and swelled painted surfaces should be cleaned by scraping. For new plastered surfaces it should be waited for at least 4 weeks before application. Uneven and loose surfaces and surfaces containing capillary cracks should be filled with Acrylic Exterior Putty. It is recommended to use one coat of Silicone Cover Primer “or” Silicone White Primer” as a primer for color changes to reduce the top coat paint consumption and increase the adhesion of the paint to the surface, following the smoothing process. Surfaces should be protected against rain and frost in order to avoid drying problems and application should not be done on surfaces exposed to excessive wind and direct sunlight. If the application is performed at temperatures above 35°C and between the hours of 12-16, the sunless surfaces of the buildings should be preferred.