It is a water-based, acrylic resin-based, interior and exterior concentrated transparent primer.
When applied to highly absorbent surfaces, it reduces the absorbency of the surface with its superior penetrating property and reduces the consumption of topcoat paint. It increases the adhesion of the paint by creating a solid surface. With its strong adherence feature, it creates a bridge between the top coat paint and the ground and ensures that the paint stayson the surface without swelling, breaking off from the surface, and cracking in a thin layer.
Otherwise, problems such as cracking, swelling, peeling may occur. Application temperature should be between 5°C and 35°C.
It can be easily applied on all kinds of plaster, plaster, lime whitewash, gross and aerated concrete, cement board, plasterboard, high absorbent old painted walls and ceilings and other very absorbent surfaces. The surfaces to be applied must be dry, clean and free of dust. Old and swollen painted surfaces should be scraped and cleaned. Newly plastered surfaces should be waited for at least 4 weeks before application. Damaged and loose surfaces and surfaces with hairline cracks should be putty with Acrylic Interior Paste. After the dust of the sanded surfaces is cleaned with a damp cloth or sweeping, the primer application should be started. In the primer application, the surfaces should be primed in one go without scanning. Otherwise, glare may occur in areas where the primer is highly absorbed. These surfaces must be mattified with sandpaper before the final coat of paint.
R 22: It is harmful to health if swallowed. Safety warnings: S 2: Keep out of reach of children.
S 3/7: Keep the pot in a cool place having its cap closed.
5 24/25: Avoid contact with eyes and skin.
5 29: Do not discharge to sewerage system.
S 46: If swollen, seek medical advice immediately, and show the pot or the label.
1/7 Concentrated Primer can be thinned with 1/7 Concentrated Primer +7 scales of WATER and applied with a roller or brush.
It should never be applied without thinning. It should not be used as a primer in synthetic topcoat paint applications.
It should be stored in cool and dry places out of direct sunlight, in its sealed package, between 5°-35°C and protected from frost.
